← All products
Product
TPE-V Cable Entry Grommet
A TPE-V grommet that helps protect cables from direct contact with panel edges. One product accommodates 8, 9 and 10 mm cable outside diameters; white, natural and black are listed colour options.
- Material: TPE-V.
- Product configuration: one grommet compatible with 8, 9 and 10 mm cable outside diameters.
- Primary function: helping protect the cable mechanically at the panel transition.
Request a quote for this productRequest a quote on WhatsApp
View all product information ↓Include dimensions, material and required quantity in your request.
Direct contact+90 (212) 612 68 40 / 41info@idealplastik.com.tr
Product information
Applications, features and available variants
Technical information
Material: TPE-V. Product configuration: one grommet compatible with 8, 9 and 10 mm cable outside diameters. Primary function: helping protect the cable mechanically at the panel transition. Listed colours: white, natural and black.
Temperature, UV, flame-retardancy and chemical-resistance requirements must be checked for the selected TPE-V grade and supplier documentation. Any requested compliance evidence is evaluated for the actual material and application. Without confirmed IP or sealing-test evidence for the product, complete water and dust sealing is not promised.
Cable routing and separate sealing requirements
A grommet protects a cable at the edge of an opening; a cable holder supports its route within a device. A separate gasket may address a different sealing requirement. Select each component for its own geometry, function and operating conditions.
Selection and production
Plan the product for your project
The TPE-V cable entry grommet reduces direct contact between a cable and sharp surfaces at a panel or enclosure opening. Its flexible form seats in the panel hole and helps reduce the risk of cable damage caused by friction, vibration and edge contact.
The same product accommodates cable outside diameters of 8, 9 and 10 mm. These figures describe the cable compatibility of one product, not three separate size variants. Actual cable diameter and tolerance, the panel hole and panel thickness must be checked together before ordering.
What does a cable entry grommet do?
A panel-hole edge can abrade, compress or cut the cable jacket. The grommet places a flexible contact surface between the cable and that edge to help reduce this risk. Its primary function is mechanical protection. It should not be treated as a cable-clamping or strain-relief device, or as a verified water- and dust-sealing solution.
Material and colour options
The product is made from TPE-V. Listed colours are white, natural and black. Other colour or technical material requests can be evaluated against the operating conditions and production quantity. A listed colour is not a commitment to current stock or a particular delivery time.
Application areas
The grommet can be evaluated for panel transitions in household-appliance wiring, electrical panels, electronic enclosures, luminaires and industrial control boxes. Automotive suitability requires a separate review of cable dimensions, panel geometry, temperature, vibration and fluid contact. Listing an application does not establish approval for every installation.
Selecting the product for your panel
Provide the actual cable outside diameter and tolerance, hole dimensions and geometry, panel thickness and available mounting space. Include friction, vibration, temperature, humidity, liquid and chemical exposure. Colour or special material requirements and sample or series quantities complete the selection and production enquiry.
Installation and sample verification
Seat the grommet in a correctly dimensioned panel opening before completing cable passage. The panel edge should be free of burrs, the grommet fully seated and the cable not excessively compressed. Before series assembly, use samples to check seating, cable passage and repeatability. Nominal cable diameter alone does not confirm the fit or installation method.
Request a quote for your cable entry
Share the cable diameter, panel-hole dimensions, panel thickness and quantity with İdeal Plastik. For routing cables, review M-type cable holders; for a separate sealing requirement, discuss the TPE sealing gasket range against its own application criteria.
Technical documents
Review product data at its source
Technical values stated in the document
- Catalogue product range
- Cable entry grommets for 8 mm, 9 mm and 10 mm cables
- Catalogue applications
- Electrical panels, lighting fixtures, industrial control enclosures, appliance internal connections, automotive and defence electronics
Values are transcribed from the 2026 catalogue/flyer. Suitability must be confirmed for the selected variant, installation and actual operating conditions during quotation.
Questions and answers
Frequently Asked Questions
What does the cable entry grommet do?
It reduces direct contact between a cable and the sharp edge of a panel hole, helping reduce damage associated with friction, vibration and edge contact.
Which cable diameters does it accommodate?
The same product accommodates 8, 9 and 10 mm cable outside diameters. These are not three separate product variants. Cable tolerance and panel dimensions still need to be checked.
What material is used?
The product is made from TPE-V. The material grade must be assessed against the operating conditions and technical requirements.
Does the grommet provide water and dust sealing?
Its primary function is mechanical protection. Complete water and dust sealing is not promised without confirmed IP or sealing-test evidence for this product and its installation.
Can it be used in automotive applications?
It can be evaluated at suitable cable-entry points after reviewing cable size, panel geometry, temperature, vibration and fluid contact. Verify fit and suitability using samples and project conditions.
Are other colours or materials available?
Listed colours are white, natural and black. Other colour or technical material requests are assessed against production quantity and operating conditions. Availability is confirmed for the enquiry.
Request a quote
Discuss this product for your project.
Share the part, dimensions, material, quantity and operating environment.
M-Type Push-In Cable Holders
Injection-moulded PA66 cable holders with push-in panel fixing for organised cable routing. Two M-type geometries are available; one model accommodates a 6 mm cable diameter.
LED PCB Push Fix Mounting Clip
A polycarbonate (PC) Push Fix clip for locating and retaining LED circuit boards in compatible hole and panel geometries. Standard supply, sample checks, custom clip development and injection moulds can be assessed.
Automotive Plastic Components and Mould Solutions
Supply and development of dust boots, plastic tie-rod housings, retaining rings and protective caps. Drawings, samples, material requirements and application conditions guide tooling and series-production planning.
HVAC and Ventilation Plastic Components
Project-specific mould development, contract injection moulding, samples and series production for HVAC and ventilation components. Imported parts can be assessed for production alternatives in Türkiye.
Technical knowledge