M-Type Push-In Cable Holders

M-type cable holders help keep cables on a defined route within machine and device chassis. A push-in fixing stem seats the holder in a suitable panel hole. The range includes two M-type geometries for different cable and mounting needs.

Product models

M-Type Cable Holder

This model supports a defined cable route inside the machine or device. The open top helps with cable placement, while the push-in stem secures the holder in a compatible panel opening. Check cable dimensions and panel geometry together through sample assembly.

M-Type Cable Holder for 6 mm Cable

This model is designed for a 6 mm cable diameter and helps guide the cable within the chassis and limit unwanted movement. The 6 mm figure refers to the cable, not the panel-hole diameter. Hole dimensions and panel thickness must be compared separately with the holder's mounting geometry.

Both models are injection-moulded from PA66, with natural as the standard colour. Other colours can be assessed against production volume and project conditions. Where a cable must be held in a closed or locking arrangement, a separate design can be developed for the cable size, mounting surface and working environment; it is not presented as one of these standard open M-type models.

Features and application areas

The one-piece body and push-in stem can reduce the need for additional fasteners at a suitable panel connection. The open holder supports cable placement and organised routing in washing machines, tumble dryers, dishwashers and other appliances, as well as electrical or electronic enclosures, lighting systems and industrial control equipment.

Automotive applications require verification of cable dimensions, panel geometry, vibration, temperature and chemical exposure. Compatibility with every cable diameter or every outdoor environment is not assumed. Temperature, flame-retardancy, UV and chemical-resistance requirements must be reviewed for the selected PA66 grade and supplier evidence. Service life depends on these conditions and the installation.

Selection and mounting checks

Review the cable or bundle size and load, panel-hole diameter and shape, panel thickness, mounting direction and available space. The holder must seat correctly and guide the cable without excessive compression. Specify any fluid exposure, colour or material requirements and the sample and annual quantities.

Before series assembly, use samples to verify stem seating, cable placement and installation repeatability. Assess the required retention behaviour, removal needs and working conditions with the product. A nominal cable size alone is not sufficient to define the mounting hole or confirm the complete connection.

From project to series production

For a customer-owned injection mould, İdeal Plastik reviews machine compatibility, material requirements, quality criteria and annual volume. Suitable projects can proceed to trial moulding, process verification and series production. If the standard holder does not meet the need, a technical drawing, sample or dimensioned sketch can support a new product geometry and mould.

An alternative manufactured in Türkiye can be evaluated for an imported cable holder using its connection geometry, operating conditions and annual demand. Material, mould investment, unit cost and supply continuity are considered together. Third-party patents, designs and other intellectual property rights must be respected. Series production follows design and sample approval.

Request a quote for your cable holder project

Share cable size, panel-hole dimensions, panel thickness, environment and annual quantity with İdeal Plastik. For mechanical protection at a panel edge, also review the cable entry grommet as a separate component.